Graphite Plate – Heatbed Upgrade For Creality K2 Plus

Documentation: https://support.dremc.com.au/en/support/solutions/articles/51000481212-k2-plus-r3men-graphite-install-guide

Community Mods:

• For alignment guide https://www.printables.com/model/1279370-k2-plus-extended-build-plate-guides-beta

General Note: You should never cut into AC heater pad. 

Preparation:

Before applying either the magnetic sheet(for steel flex plate) or silicone heater to the bottom side we recommend to scuff surface with steel wool and wipe clean with isopropyl alcohol (IPA) before application. For Graphite, ensure the surface is completely dried before applying anything onto build plate such as AC Pad or Magnet. 

More Info: https://www.youtube.com/watch?v=vZx4vfevwx4

More Info AC Pad Install/FAQ: https://support.dremc.com.au/en/support/solutions/articles/51000302252-keenovo-ac-heater-faq

Shipping Note: 

We ship items in a flat cardboard sandwich box to prevent warping during transit. This item cannot be combined with non-flat items for shipping, so please expect additional freight costs when bundling it with smaller parts or filament. If we can bundle smaller items within the same box, we will update the shipping total before processing your payment. Otherwise, feel free to contact support for a customised quote.

Note

• To make sure the optimum performance for this heater is achievable, both temperature sensing and control elements should installed to controller.

Caution

• The Heater Mat is not suitable for stand-alone operation.
• Do not cut into the heater pad
• Ensure proper strain relief on wiring and proper grounding of the cast bed.

Warning

• These heaters shall only be used where adequate electrical, thermal and mechanical barriers are provided to prevent access to hazardous parts without the use of a tool.