Everest Trade Paints – Ultimate Tennis Court Paint – Line Marking Paint – Anti-slip

PRODUCT DESCRIPTION

A heavy-duty line marking paint for use with Everest Trade Paints – Ultimate Tennis Court Paint and Colour Restorer.

This product is also 100% UV resistant resulting in excellent colour retention which allows the coating to stay fresh and new for longer than other tennis court coatings.

Made in England with Premium Acrylic Resins.

SURFACE PREPARATION

If Applying Over Everest Trade Paints – Ultimate Tennis Court Paint:

1. Make sure Everest Trade Paints – Ultimate Tennis Court Paint is fully dry before applying this paint.
2. Using masking tape to mark out the lines.

If Applying to an existing non-coated court:

1. Ensure all surfaces are sound and clean, free from dust or any other contaminants. 
2. We recommend you clean the surface beforehand with a pressure washer and treat the surface with Everest Ultimate Driveway Cleaner to remove any remaining green mould, lichens and algae.
3. Make sure no rain is forecast for the day of application.

COLOURS AVAILABLE
White. If another colour is required, please contact us.
 
SPREADING RATE (Coverage)
Approximately 6 – 8 square metres per litre.
 
DRYING TIME
Under normal circumstances, it should be touch dry in 4 hours if well ventilated and conditions are dry.
 
APPLICATION
East to apply, should be applied with a brush and roller.

Mix thoroughly before use with a paddle mixer drill attachment.
Make sure the surface is 100% dry and free from any moisture or contaminants before application.

Apply two coats to a dry surface with at least 4 hours between coats.

Should be applied with a roller, ideally a medium pile roller with a double-armed frame, this product can’t be sprayed due to the added anti-slip particles.

We recommend applying this product with a ProDec Professional 12″ Roller Application Kit – Roller Tray – Double Arm for best results.
 
STORAGE PRECAUTIONS
Store away from heat and flames. Secure lid between uses to prevent paint hardening.
 
THINNERS
Can be let down with water if needed. Not recommended.
 
SURFACE PREPARATION
Ensure all surfaces are sound and clean, free of algae and moss. 
Ensure the surface is completely dry and free from condensation and damp.
Remove any loose or flaking paint.

BATCH INFORMATION
We recommend ordering all the paint required in one order so you receive the same batch, Ordering on different dates will result in receiving different batches which may result in a shade difference.
This is fine if you are planning on using the different batches on different coats, However, it’s not recommended to use on the same coat.